To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric WELD-PAK 90i FC and is the answer not in the manual?
General| Input Voltage | 120V |
|---|---|
| Input Power | 20A |
| Max Output | 90A |
| Type | MIG |
| Wire Feed Speed Range | 50-500 IPM |
| Maximum Open Circuit Voltage | 30V |
| Process | Flux-Cored |
| Wire Diameter Capacity | 0.030-0.035 inches |
| Wire Size | 0.030-0.035 in |
| Welding Output Range | 30-90 amps |
Emphasizes user's role in safety and reading the manual.
Details necessary personal protective equipment for welding.
Warns about arc welding risks and potential electromagnetic field interference.
Essential steps to avoid electrocution, including insulation and grounding.
Guidance on shielding from arc rays and managing hazardous welding fumes and gases.
Precautions against sparks, flammable materials, and container hazards.
Essential safety practices for handling compressed gas cylinders.
Provides an overview of the Weld-Pak 90i FC machine's capabilities and intended use.
Details output current, voltage, input, duty cycle, wire feed, and weight.
Details on the machine's power input cable, plug, and circuit needs.
Step-by-step instructions for loading wire spools onto the machine.
Detailed steps for threading welding wire through the gun and liner.
A guide to initiating and performing welding tasks.
