1 Unscrew the container tube 1
1
/2 turns
from the head and plunger assembly.
2 Withdraw the follower rod from the con-
tainer cap and engage it with the follower
by rotating the follower handle.
Exert force on the follower handle until
lubricant oozes from the tube and head
interface.
3 Tighten container tube into the head and
plunger assembly. Disengage the follower
rod from the follower by rotating the fol-
lower handle. Push the follower rod into
the container.
To expel air pockets
!
Notice
Air pockets in the cartridge lubri-
cant will cause the lever gun to lose its
prime.
!
Notice*
If inspection and cleaning are not
performed correctly, grease gun will lose
prime and will continue to lose prime
until cleaned properly.
* Indicates change
5
To Next Page
Loading...
Need help?
General
