2. Rotate the foglamp socket
counterclockwise and remove.
3. Install the new bulb.
4. Connect the electrical connector
to the back of the foglamp assembly.
High-mount brakelamp
For bulb replacement, see a dealer or qualified technician.
Replacing tail lamp bulbs
1. Open the liftgate to expose the
lamp assemblies.
2. Remove the two screws at the top
of the lens.
3. Carefully pop the lens off (it may
be necessary to use a screwdriver to
remove the lens).
4. Twist the connector ¼ turn
counterclockwise and pull it out for
replacement.
5. Pull the bulb straight out of the
recess and replace it.
6. Replace the lens and secure the two screws.
Maintenance and care
164
To Next Page
Loading...
