To Next Page

To Previous Page

Increasing speed while using speed control

There are two ways to set a higher

speed:

• Press and hold the SET + control

until you get to the desired

speed, then release the control.

You can also use the SET +

control to operate the Tap-Up

function. Press and release this

control to increase the vehicle set

speed in small amounts by 1 mph

(1.6 km/h).

• Use the accelerator pedal to get to the desired speed. When the

vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are two ways to reduce a set

speed:

• Press and hold the SET - control

until you get to the desired

speed, then release the control.

You can also use the SET -

control to operate the Tap-Down

function. Press and release this

control to decrease the vehicle

set speed in small amounts by 1

mph (1.6 km/h).

• Depress the brake pedal until the desired vehicle speed is reached and

press the SET control.

2006 Zephyr (378)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

Lincoln 2006 Zephyr User Manual

Other manuals for Lincoln 2006 Zephyr