©
© Indicates change
Models 84803, 84804, 84806, 84808, 86810
3, 4¼, 6, 8 & 10 IN. AIRMOTORS
Series “B”
OWNERS MANUAL
IT IS THE RESPONSIBILITY OF THE OWNER AND/OR OPERATOR TO PROPERLY USE AND MAINTAIN THIS
EQUIPMENT. CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL
BEFORE OPERATING THIS EQUIPMENT.
If the operator is not uent in English, the instructions and warnings shall be read and discussed in the operator’s native language,
making sure the operator comprehends the contents.
This equipment complies with OSHA Standards where applicable.
DO NOT exceed the stated maximum working pressure of the airmotor or of the
lowest rated component in your system.
DO NOT alter or modify any part of this equipment.
DO NOT operate this equipment with combustible gas.
DO NOT attempt to repair or disassemble the equipment while the system is
pressurized.
TIGHTEN all uid connections securely before using this equipment.
ALWAYS read and follow the uid manufacturer’s recommendations regarding
uid compatibility, and the use of protective clothing and equipment.
CHECK all equipment regularly and repair or replace worn or damaged parts im-
mediately.
IMPORTANT: Failure to heed these warnings including misuse,
overpressurizing, modifying parts, using incompatible chemicals and uids, or
using worn or damaged parts, may result in equipment damage and/or serious
personal injury, re, explosion, or property damage.
This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. READ AND RETAIN FOR REFERENCE.
One Lincoln Way
St. Louis, Missouri 63120-1578
(314) 679-4200
Copyright 2007
Printed in U.S.A.
Page
Section
- A50
- 78H
FORM 403662
MAY - 2007
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
General