EasyManua.ls Logo

LINCOS STD-3550 - Introduction; Technical Data

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Ékszíjas meghajsú, olajkesű, dugatt
LINCOS Slovenia
STD-3550
Two Post Lift - Electrical Release
1 INTRODUCTION
This guide has been made to supply the owner as well the user with the basic
instructions for a correct use of the machine. Read this guide carefully before using
the machine and following the instructions given by this guide to grant the machine a
correct function, efficiency and a long service life
The electro/hydraulic lift is composed by two symmetric vertical columns which must
be safety anchored at ground. Trolley is equipped inside each column.
The lift is operated by an electric motor controlling a hydraulic pump, which delivers
the hydraulic fluid to cylinders inside the columns for lifting two trolleys.
The 2-post lift is suitable for lifting motor vehicles having maximum weight as
described below: any other use is to be considered improper and irrational and thus
highly forbidden. the constructor cannot be held responsibilities for any damage or
injuries caused by an improper use or the non-observance of the following
instructions:
2 TECHNICAL DATA
Technical parameter
Rated load
Rising and
falling time
Hoist
height
Hydraulic
oil
Electric
power
Rated oil
pressure
5500Kg
4060S
≥1880mm
N46#
3.0KW
20-24Mpa