Need help?Do you have a question about the LINCOS U-B30 and is the answer not in the manual?
Details on how the equipment is packed for transport, including standard components.
Lists the standard components included with the lift.
Instructions and precautions for lifting and moving the equipment.
Guidelines for storing the machine in a warehouse or during shipping.
Importance of keeping the manual with the lift for easy access.
Details on the intended use and suitability of the scissor lift.
Highlights the key design and operational characteristics of the lift.
Lists the main components and parts of the scissor lift system.
Describes the foundational elements, like the concrete base for installation.
Details the materials and construction of the lift's structural frame.
Explains the function and components of the lift's control system.
Presents a detailed comparison of technical specifications for different models.
Specifications and details related to the lift's motor component.
Technical details and specifications for the hydraulic pump.
Provides a visual layout and requirements for installing the lift.
Outlines the necessary conditions and materials for proper installation.
Details the connections for power and compressed air supply.
Specifies the kinds of vehicles compatible with the lift's capacity.
States the maximum weight limit for vehicles to be lifted.
Illustrates criteria for vehicle dimensions to ensure safe operation.
Essential safety guidelines for operating and maintaining the lift.
Lists prohibited applications and activities for the scissor lift.
Rules operators and fitters must follow regarding safety regulations.
Examines risks and the manufacturer's safety devices to minimize hazards.
Identifies safety equipment and risks associated with lifting and lowering operations.
Highlights potential hazards for operators and others near the lift.
Warns about dangers of personnel being caught in moving parts.
Alerts to potential impacts with machine parts during operation.
Prohibits personnel from entering platforms during movement to prevent falls.
Discusses hazards related to incorrect vehicle positioning or dimensions.
Addresses risks from lubricant contamination on the floor.
Warns about electrical hazards in specific areas of the lift.
Emphasizes the need for proper illumination for safe operation.
Details the necessary conditions, space, and safety distances for installation.
Instructions for connecting the electrical and oil lines to the lift.
Guides on how to connect the electrical wiring for power supply.
Steps for connecting the hydraulic oil pipes to the system.
Instructions for connecting the compressed air lines to the lift's pneumatic system.
Procedure for adding hydraulic oil and verifying correct electrical phase.
Steps for adjusting oil levels to ensure proper platform synchronization.
Fine-tuning the levelness of the lift platforms.
Instructions for securing the lift to the ground using anchor bolts.
Procedures for adjusting the lift's base plate for precise leveling.
Performing operational checks without a vehicle on the lift.
Conducting operational tests with a vehicle on the lift.
Explains how to operate the lift using the control panel buttons.
Details the sequence of actions for lifting the vehicle.
Details the sequence of actions for lowering the vehicle.
How to use the emergency stop button in critical situations.
Correcting platform height differences during normal operation.
Procedure for manually lowering the lift during a power outage.
Specifies how often different parts of the machine need lubrication.
Guidelines for replacing the hydraulic oil annually.
Regular checks on the agility and reliability of pneumatic safety features.
A table listing common failures, their causes, and solutions.
General| Brand | LINCOS |
|---|---|
| Model | U-B30 |
| Category | Scissor Lifts |
| Language | English |
To Next Page
