User modes
4
Party Mode
A timed function, active for 3 hours after activation, in which the nominal speed is
increased by 30%. When this function is active on the main screen, the icon will also be
active. The 30% boost is used to offset the increased CO2 and Humidity levels created by
increased occupancy.
Holiday mode
An anti-mould function with the fans at minimum speed. When this function is active on
the main screen, the icon will also be active. To be activated during extended periods of
time away from the property for example when you’re on holiday.
Automatic mode
The fan’s speed is controlled by means of an automatic control cycle taking into account
any ambient change in humidity and CO
2
. This mode is only available for the Pro version
or for units equipped with an air quality sensor (humidity by default or CO
2
). The RHR
should be running on this constantly unless specified otherwise. When this function is
active on the main screen, the icon will also be active
To Next Page
