Need help?Do you have a question about the Lindab RHR-CF and is the answer not in the manual?
Timed function increasing fan speed by 30% for 3 hours.
Anti-mould function with fans at minimum speed for extended periods away.
Fan speed controlled by ambient humidity and CO2 levels.
Details external structure, filters, heat exchanger, fans, and control unit.
Instructions for hooking the unit to a bracket and securing it to the wall.
Connects the condensate drain to the sewage system, ensuring proper height and siphon.
Details how to install the unit using floor stands and ensure it is level.
Illustrates the direction of airflow for intake, exhaust, supply, and extract.
Procedures for checking, cleaning, and replacing filters as indicated by the controller.
Steps to disable the filter replacement reminder on the controller display.
Guidance on checking and cleaning the heat exchanger, including safety precautions.
Table detailing fault types, signals, notes, and solutions for unit alarms.
Detailed steps for mounting the unit on a wall using a hanging bracket and levelling feet.
Instructions for installing the unit on the floor using optional base stands.
Diagram and notes for the standard left-side configuration of the unit's air connections.
Diagram and notes for the right-side configuration of the unit's air connections.
How to configure units without a preheater, including filter reversal and dip switch settings.
Notes on pre-configured units with electric preheaters and factory dip switch settings.
Explains airflow rates, pressure drops, and provides performance curves for different operating modes.
Instructions for accessing the PCB and connecting the remote control panel.
Details PCB dip-switch settings, Modbus address configuration, and power chord connection.
Guide to setting the nominal airflow rate, clock, and day for operational readiness.
General| Brand | Lindab |
|---|---|
| Model | RHR-CF |
| Category | Heating System |
| Language | English |
To Next Page
