Linddana A/S, Ølholm Bygade 70, DK-7160 Tørring, Telefon +45 75 80 52 00 Fax +45 75 80 54 11
User Manual: TP 160 14.09.2010 Email: tp@linddana.dk
Copyright 2009
2
1 Introduction
Congratulations on your new TP wood chipper.
Linddana produces TP wood chippers of the finest quality by using the most modern production
technologies, i.a. laser cutting, CNC technology and robot technology in bright and open production
facilities.
For safety reasons and in order to get maximum pleasure from the wood cutter, it is important to
read these instructions before use.
The user manual explains about safety, use and maintenance so that the work with the wood chipper
will be safe and profitable.
This manual has been translated from Danish.
Linddana A/S
Jørgen Due Jensen, Managing director
Your distributor is always available with spare parts, advice and guidance.
Distributor stamp
To Next Page
Loading...
