Linde H 70 - 02 H 80 - 02 User Manual

IC Sit-Down Rider Trucks
SAFETY TIPS
and a guide to the
Information Plates,
Operation and Warning Decals
found on your truck
LINDE LIFT TRUCK CORP.
A MEMBER OF THE LINDE GROUP
161970 February 2003

Linde H 70 - 02 H 80 - 02 Specifications

General

Brand	Linde
Model	H 70 - 02 H 80 - 02
Category	Trucks
Language	English

Summary

Safety and Operation Basics

Foreword

Introduction to the operator's manual, its purpose, and safety guidelines.

General Safety Rules

Explains safety signs and messages, including DANGER, WARNING, CAUTION.

Before Operation

Pre-operation checks including work area inspection and safety equipment.

OPERATOR’S DAILY CHECKLIST

Instructions for performing a daily inspection of the truck.

PEDESTRIANS

Safety guidelines for interacting with pedestrians.

OPERATING POSITION

Instructions for mounting, dismounting, and operating position.

TRAVEL

Guidelines for operating the truck safely on various surfaces.

INCLINES, RAMPS, DOCKS, ELEVATORS

Safety precautions for operating on inclines, ramps, docks, and elevators.

TIP-OVER

Explanation of lateral and longitudinal tip-over causes and prevention.

PARKING

Proper shutdown procedures and parking guidelines.

Truck Identification and Technical Data

Technical data

Detailed technical specifications and dimensions of the lift trucks.

Type plates

Identification and explanation of various type plates on the truck.

Engine

Details about the water-cooled, 6-cylinder supercharged Diesel engine.

Brakes

Explanation of hydrostatic transmission as service brake and disc brakes.

Hydraulic system

Description of the variable-displacement pump and motor drive system.

Truck Operation Procedures

Driving

General driving instructions and safety precautions.

Starting the engine

Step-by-step procedure for starting the diesel engine.

Before lifting a load

How to check capacity diagrams before lifting loads.

Loading

Procedure for safely approaching and loading materials.

Transporting a load, depositing a load

Guidelines for safely transporting and depositing loads.

Maintenance and Troubleshooting

Inspection and maintenance as required

General inspection and maintenance tasks.

Cleaning the air filter

Procedure for cleaning the air filter element when the restriction indicator illuminates.

Regenerate the particle filter*

Procedure for regenerating the particle filter to clear soot buildup.

Check seat belt for condition and operation

Regular inspection of seat belt condition and operation.

500-hour inspection and maintenance

List of maintenance tasks for every 500 operating hours.

Renew the engine oil (at least every 12 months)

Procedure for renewing engine oil and filter.

1000-hour inspection and maintenance

List of maintenance tasks for every 1000 operating hours.

Renew the fuel filter canister

Procedure for renewing the fuel filter canister.

3000-hour inspection and maintenance

List of maintenance tasks for every 3000 operating hours.

Renew the coolant

Procedure for draining and refilling the cooling system with coolant.

Fuel and oil recommendations

Recommendations for fuels, oils, and lubricants.

Troubleshooting guide (Diesel engine)

Common diesel engine malfunctions and their remedies.