Linde H160 - Replace the toothed belt and idler pulley; Check Valve Clearances

OOppeerraattiinngg IInnssttrruuccttiioonnss –– 33558888001111660011 EENN –– 1122//111 1 112277

55
MaintenanceMaintenance
EngineEngine
11
22
11
 11
22
22
d3591087d3591087
CCleleanan ththee fufuelel filfilteterr
CAUTIONCAUTION
Follow the instructions for handling fluids andFollow the instructions for handling fluids and
lubricants.lubricants.
 Place a container underneath filter (1) Place a container underneath filter (1) toto
cacatctchh ananyy flufluidid rurunnnniningg ouout.t.

Open drain valve (2) by turning it anti-Open drain valve (2) by turning it anti-
clockwise approximately 3½ turns untilclockwise approximately 3½ turns until
valve (2) drops down 25 mm (1 inch), andvalve (2) drops down 25 mm (1 inch), and
draining occurs.draining occurs.

AllowAllow fuelfuel toto draindrain untiluntil clearclear fuelfuel emerges.emerges.

Close drain valve (2), hand tight only, asClose drain valve (2), hand tight only, as
sosoonon asas clcleaeann fufuelel ememerergeges.s.
CAUTIONCAUTION
WhWhenen cloclosinsingg drdraiainn vavalvelve(2(2),), dodo nonott oveoverr titighghteten.n.
OveOvertirtightghtenieningng cancan damdamageage thethe thrthreadeads.s.
 Dispose of drained fuel in a way that isDispose of drained fuel in a way that is
frfrieniendlydly toto ththee envenvirironmonmentent..
https://www.besttruckmanuals.com/