This product is subject to continuous technological development.
The OSD and the functionality may differ slightly from the one described here 8
Matrix Switching via OSD and Hotkey
The KVM Switching OSD is invoked by the hotkey
CTRL+ALT+F12.
It lists all computers and their status in the switching
network.
In BLUE the recently connected computer is listed.
In White the other computers with connection to a
console are listed.
In Green powered computers without connection to
a console are listed.
In Red computers / RX boxes are listed that once have been connected but are not available
recently. If required, these entries can be deleted by pressing the DELETE key.
Select a computer ( > ) by cursor keys up / down, the RETURN key switches to the selected
computer. The order (line number) of the computers in the menu can be changed by typing the
desired number in a row and the list will be reorganized.
The hotkey combination CTRL+ALT+F4 switches to computer no. 4 in the list.
If the password system is active the user will be displayed in the OSD at the bottom.
The key X logs out, the key D interrupts the recent connection to the selected computer.
Trouble shooting
If you cannot solve problems with this Extender please contact our support. You can reach us worldwide at
the numbers listed on our website. Or send us an email to support@lindy.com.
Legal Information
Hersteller / Manufacturer (EU): LINDY Electronics Ltd.
LINDY-Elektronik GmbH Sadler Forster Way
Markircher Str. 20 Teesside Industrial Estate, Thornaby
68229 Mannheim Stockton-on-Tees, TS17 9JY
GERMANY United Kingdom
Email: info@lindy.com , T: 0049 (0)621 470050 postmaster@lindy.co.uk , T: +44 (0) 1642 754000
CE Declaration of Conformity
This equipment complies with the requirements relating to Electromagnetic Compatibility Standards EN55022/EN55024 and the further
standards cited therein. It must be used with shielded cables only.
It has been manufactured under the scope of RoHS compliance.
WEEE (Waste of Electrical and Electronic Equipment), Recycling of electronic products
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is
no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your
national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling
agency.
To Previous Page
Loading...
