11
L6 LINK
For Powercab 112 Plus devices, the L6 LINK / AES XLR input and
output jacks provide easy digital audio connectivity between a Line 6
Helix modeling device and two Powercab 112 Plus devices for stereo
operation (use of a 110Ω XLR cable is recommended). Two Powercab
112 Plus devices can be connected in series via L6 LINK and your stereo
L6 LINK or AES signal is intelligently split, with the left channel going to
the rst unit, and the right channel to the second. If you have only one
device connected via L6 LINK, the L6 LINK or AES signal is collapsed to
mono and fed to the device.
L6 LINK and Helix
For information about the specic functionality for using L6 LINK
connectivity between Helix and Powercab devices, please see the Helix
Owner's Manual, available from http://line6.com/support/manuals/.
To Next Page
Loading...
Need help?
General