EasyManua.ls Logo

Line 6 SPIDER 212 User Manual

Line 6 SPIDER 212
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Spdr212 Main Rev C.sch-1 - Wed Sep 27 15:33:50 2000
Question and Answer IconNeed help?

Do you have a question about the Line 6 SPIDER 212 and is the answer not in the manual?

Line 6 SPIDER 212 Specifications

General IconGeneral
Number of Channels4
ReverbYes
USBNo
Outputs1 x Headphone
EffectsChorus, Flanger, Phaser, Tremolo, Delay, Echo, Wah

Summary

Spider Amps Reinitialization Procedure

Spider Amps Firmware Version Identification

Spider 212 Test Setup and Instructions

Spider 212 Individual Test Descriptions

EPROM Test

Tests EPROM integrity by summing bytes and comparing to stored value. Failures indicate misprogrammed or faulty EPROM, or connection issues.

EEPROM Test

Tests EEPROM integrity by writing a bit pattern. Failures indicate microprocessor control line shorts or faulty EEPROM.

LED Test

Visually inspects all LEDs for proper function, timing, and absence of flickering or shorts.

Analog to Digital Converter Potentiometer & Switch Test

Tests potentiometers and switches by observing corresponding LED behavior. Checks for sequential lighting and proper response to plugs/unplugs.

Remote Test

Tests A/D pedal values and serial communication visually. Checks for proper response and serial port functionality.

Audio Test

Tests audio output functionality and main volume knob operation during Test Mode.

Spider Software Version Number

Spider Default Initialization

Related product manuals