Line 6 Spider Jam - Managing Recordings

Loop Recording with Spider Jam
5•3
begins at beat 1 of the next bar. This will also set the loop start point.
Play or sing.•
Press the • Rec / Overdub button to set the loop end point. Loop immediately begins
to play back from the beginning, and will continuously loop.
Or, press the • Play / Stop button to set the loop end point and stop playback.
Once you have a loop recorded and playing back, press the • Rec / Overdub button
twice to overdub additional audio on top of the loop.
Quick Capture
If you’ve got a guitar riff that you want to capture quickly without having to set up the
recorder, press and hold the Undo button then press the Rec button. This forces Rec
Select to Guitar, turns off the Song/Drums, and immediately starts the recorder. Press Play
/ Stop to stop recording.
Undoing the Last Recording
Press the Undo button to erase your last overdub.
Clearing (Erasing) the Current Track
To access the Clear functions:
Hold the • Undo button for 2 seconds.
Clear All• is initially selected:
Press • Undo to completely clear recorded audio, and also clear the Drum/
Song selection.
Or turn the • Select knob to choose Clear Guitar Track:
Press • Undo to clear just the guitar track, without affecting the Mic/Aux
track or the Drum/Song selection.
Or turn the • Select knob to choose Clear Mic/Aux Track: