Loop Recording with Spider Jam
5•4
Press • Undo to clear just the guitar track, without affecting the Mic/Aux
track or the Drum/Song selection.
Or turn the • Select knob to choose Clear Song/Drum Track:
Press • Undo to clear the current Drum/Song selection, but leave any current
recorded audio undisturbed.
Saving Recordings
When you save a recording, your complete setup is saved, including any recorded audio,
which Song is selected, your levels, Aux setup, Mic FX and guitar tone preset. To save a
recording to internal memory:
Press the • Save button.
Turn the • Select knob to highlight Save Recording To Internal.
Press • Right on the 4-way button.
Turn the • Select knob to select the location you want to save to.
Press • Right on the 4-way button.
If you want to rename the new recording, press • Left/Right on the 4-way button to
pick a character and the Select knob to change that character.
Press • Down on the 4-way button to save, or press the Song, Level, or Tone buttons
to cancel.
Loading Recordings
To load a recording:
Press the • Song / Drums button to show the Song/Drums Page.
Press • Right on the 4-way button to select Rec.
Turn the • Select knob to see the available recordings.
When you get to the one you want, press the • Play button to play the Recording and
remain in the list. Or, press Right on the 4-way button to play the Recording and
exit the list.