Need help?Do you have a question about the Linea DH-650 and is the answer not in the manual?
Critical warnings about power cord, voltage, and general machine use.
Warning against self-repair and advising to call a qualified engineer.
Caution to keep loose items away from rollers to prevent entanglement.
Advice on avoiding water, wet hands, and using the safety guard.
Caution regarding hot rollers and surfaces, and appropriate materials.
Recommendations for ventilation, space, and power cable placement.
Guidance on using high-quality lamination film, specifically BOSS film.
Labels for parts like heating roller, control panel, and feed table.
Guidance on assembling the optional stand for the laminator.
How to set and view current/set temperatures, and overheat protection.
A chart providing recommended temperature settings for different film types.
Instructions on adjusting the machine's operating speed using the control knob.
Switching between hot and cold lamination settings.
Using the forward/reverse and run/stop switches for machine operation.
Initial setup, circuit breaker, and screen error messages.
Step-by-step guide to loading film for encapsulating, including mandrel preparation.
Detailed instructions on threading film through rollers and stabilizer bars.
Ensuring correct roller pressure and refitting safety guards for operation.
Guidelines for cleaning rollers with mild cleaners and avoiding damage.
Solutions for power loss, cloudy output, wrinkles, and film wrapping.
Technical details including width, thickness, temperature, speed, power, and dimensions.
Details on the one-year warranty, packaging, and reporting damage.
Exclusions from warranty, such as film jams, misuse, and accidental damage.
General| Category | Laminator |
|---|---|
| Laminating Speed | 500 mm/min |
| Number of Rollers | 2 |
| Temperature Settings | Adjustable |
| Jam Release Lever | Yes |
| Model | DH-650 |
| Power Supply | 220-240V, 50/60Hz |
| Pouch Thickness | 125 microns |
To Next Page
