Linea Pro 5 - Battery Status and Charging; Charging Modes

1 DATECS Linea Pro 5 User manual
`
Battery status level of the Linea Pro 5
While the device is charged, depending on the battery level, one of the LEDs is
blinking.
When the device is fully charged all 4 LEDs are continuously lighting.
Charging Modes
- Enable pass-through sync (enable sync between iPod 5 and PC with charge)
16
LED1 and LED2 are
lighting – battery level
is between 3,6V and
3,7V.
LED1 is lighting – battery
level is under or equal to
3,6V.
LED1, LED2 and LED3 are
lighting – battery level is
between 3,7V and 3,9V.
LED1, LED2, LED3 and
LED4 are lighting –
battery level is between
3,9V and 4,2V.