To Next PageTo Next Page
Need help?Do you have a question about the Linear Access AK-31 and is the answer not in the manual?
Power| voltage | 12-24 Volts AC or DC |
|---|---|
| current typical | 30 mA |
| current maximum | 150 mA |
Output Specifications| main relay form | Form “C” 5 Amps @ 28 Volts maximum |
|---|---|
| auxiliary relay form | Form “C” 1 Amp @ 28 Volts maximum |
| solid state outputs | Short-to-common 100 mA @ 24 VDC maximum |
Operating Environment| temperature range | -22°F to 149°F (-30°C to 65°C) |
|---|---|
| humidity range | 5% to 95% non-condensing |
Weight and Dimensions| width | 3.00 inches |
|---|---|
| height | 5.00 inches |
| depth | 3.00 inches |
Guide to installing the electrical box and mounting plate for the keypad.
Step-by-step guide on wiring the keypad, including output, power, and ground connections.
How to enter the programming mode using the master code.
Instructions for programming new entry codes and their actions.
Procedure to delete a specific entry code.
Warning and procedure for erasing all entry codes.
Steps to change the master programming code.
Steps to perform a master reset, clearing all data.
Procedure to reset the master programming code to default.
