Linegrip lineScale 3 - 4. Instructions for Use; 4.4. Multi Directional Loading; 4.5. Edge Loading; 4.6. Connecting Methods

PPE Instruction Manual
PPE-R/11.114 V3:2021
Page 3 of 5
LS3-PPE-M_rev.3_201021
4. Instructions for use
4.4. Multi directional loading
The load eyes are specically designed for multi directional loading of up to 180°.
The weakest direction of load is 180° loading of one single eye (see illustration 4.4.1). Please
do not exceed 50% of specied load according to section 1.1. in this conguration.
4.5. Edge loading
Make sure the LineScale is clear of any edges and protruding elements to
avoid crossloading! Danger: in the event of crossloading severe injury or
death may be the consequence!
4.6. Connecting methods
Any permissible connector according to section 3.1 is allowed, in addition to any direct
„soft“ connection to the load eyes, like ropes, slings, soft shackles, etc.
Note: Do NOT mix „hard“ connectors with „soft“ connections in the same load eye!
4.1
DANGER!
DANGER! DANGER!
OK
NO!
4.2.1
4.3
4.2.2
4.4.1
-50%