Linergy PRODIGY PR08F10EBRT User Manual

APPARECCHIO DI EMERGENZA
EMERGENCY LUMINAIRE
ENERGY TEST
NON PERMANENTE
IP 42
ISTRUZIONI PER L'INSTALLAZIONE E L'USO
INSTALLATION AND USE INSTRUCTIONS
I
UK
EN 60598-1 EN 60598-2-22
2002/95/CE RoHS Compliant
MADE IN ITALY
230 Vac - 50 Hz
IP 65
3
21
5 6
1.RUOTARE
IL GIRAVITE NELLA
FESSURA INDICATA
2.SOLLEVARE
IL VETRO
3.SOLLEVARE
IL RIFLETTORE CON
IL CACCIAVITE
3.SOLLEVARE
IL RIFLETTORE
CON IL CACCIAVITE
4.SOLLEVARE LA
BASE
4.TAGLIARE LE
PREDISPOSIZIONI
SULLA CORNICE (PASSAGGIO CAVI)
FISSARE LA BASE
AL MURO
FISSARE IL RIFLETTORE CON
IL LED VERDE VERSO SINISTRA
1.ROTATE
THE SCREWDRIVER
AS SHOWN IN THE PICTURE
2.LIFT
THE GLASS
3.LIFT THE REFLECTOR
WITH THE SCREWDRIVER
AS SHOWN IN THE PICTURE
4.LIFT THE BOX
4.CUT
PREPARATIONS
ON THE FRAME (CABLES ENTRY)
FIX THE REFLECTOR WITH
THE GREEN LIGHT TO THE LEFT
FIX THE BASE
TO THE WALL
N.B. SUI MODELLI IP65, MONTARE IL RACCORDO PERFETTAMENTE
AL CENTRO DELLA PREROTTURA LATERALE
ROMPENDO ANCHE LA CORNICE DELLA BASE**(DETTAGLIO FIG.4)
N.B. ON THE IP65 MODELS, PUT THE IP65 CONNECTOR ON THE
BOX AND THEN DRILL THROUGH THE ALL LAMP WITHOUT CARE
ABOUT THE FRAME*(DETAIL PIC.4).
4
DIAMETRO DEL FORO
Ø16.5
4.FORARE
LE PREDISPOSIZIONI
CON LA PUNTA CONICA
4.DRILL
THE PREPARATIONS
WITH CONICAL TIP
HOLE DIAMETER
Ø16.5
DETTAGLIO CORRETTO
POSIZIONAMENTO
DELLA PUNTA CONICA
DETTAGLIO ROTTURA
CORNICE DELLA BASE
CORRECT DETAIL
OF THE DRILL POSITION
TO USE
CORNICE*
FRAME*
BOX**

Linergy PRODIGY PR08F10EBRT Specifications

General

Power	8W
Color Temperature	3000K
CRI	>80
Input Voltage	220-240V
Frequency	50/60Hz
Lifespan	25000h
Material	Aluminum

Summary

Installation and Use Instructions

Electrical Connections and Wiring Diagrams

Rest Mode with Commander Wiring Diagrams

Wiring diagrams illustrating connections for rest mode with commander unit.

Configuration Commander

Instructions for configuring the commander unit for rest mode operation.

LED Signalling

Explanation of LED indicators for power, test status, and faults.

Test Functions

Details on automatic and manual functional and duration tests.

Centralized Spy System Wiring

Spy System Bus Connection

Requirements and specifications for the bus cable used in the Spy System.

Signaling Pictogram Application

Step-by-step guide for applying the signaling pictogram to the luminaire.

Product Specifications and Information

Models Table

Table listing various models with their IP rating, power, duration, and battery.

Technical Characteristics

Key technical data including power supply, absorption, protection degree, and temperature.

General Characteristics

Overview of features like green LED indicator, LiFePo4 batteries, and plastic body.

Important Warnings

Critical notes regarding LED source replacement, battery care, and disposal.