Link Controls CDO-150 - Digital Limits and Encoder Wiring

Door Operator / CDO / LC- 3158 Rev.B – 9
6.6 Digital Limits
Electronic interface
A: AVE plug (absolute value encoder plug)
B: AVE plug terminal (absolute value encoder
plug terminals.
Information:
Please refer to the control unit operating
manual for instructions on setting the limit
end positions.
A
B
Wiring allocation,
AVE (absolute value encoder) plug
The numbers on the plug are also the wire
numbers.
4: Safety circuit input (N/C)
5: RS 485 B
6: GND
7: RS485 A
8: Safety circuit output (N/C)
9: 7...18V
DC
AVE (absolute value encoder) plug terminal (7-12)
C: Thermal element in the drive
D: Manual emergency control
(emergency crank or emergency chain)