Link Controls CDO100 Compact Series - User Manual

STA
CDO100 Compact
Instructions for Sectional Door Operator type :
Door Operator / STA/ LC- 2973 Rev.H
Stuart Road, Manor Park, Runcorn, Cheshire, WA7 1TS
T: +44 (0)1928 579050 F: +44 (0)1928 579259 www.linkcontrols.co.uk enquiries@linkcontrols.co.uk
Warning : Please read these instructions fully before installation
Link Controls
Instructions for Rolling Door Operator type :

Link Controls CDO100 Compact Series Specifications

General

Operating Temperature	-20°C to +60°C
Housing Material	ABS Plastic
IP Rating	IP54
Output Type	Relay
Input Type	Dry Contact
Input Voltage	12-24 VDC
Relay Output	1 x SPDT
Communication Protocol	Wiegand
Current Consumption	100mA max
Output Rating	2A @ 30VDC

Summary

General Safety Instructions

Intended Use of Operators

Electrical Connection Safety

Safety requirements and procedures for electrical connections.

Installation Procedures

Installation Preparation

STA Sectional Operator Mounting

Instructions for mounting the STA operator with a torque bracket.

Torque Support Bracket Mounting

CDO100 Compact Flange Mount

Installation guide for the CDO100 Compact with flange mount.

CDO100 Compact Foot Mount

Installation guide for the CDO100 Compact with foot mount.

Emergency Hand Chain Installation

Initial Operation and Setup

Pre-Operation Checks

Motor and Limit Switch Wiring

Connecting the motor and limit switches.

Limit Switch Microswitch Connections

Motor Power Connections

Setting Mechanical Limits

Adjusting the door's open and closed end positions.

Digital Limits and Encoder Wiring

Wiring for the absolute value encoder plug.

Emergency Operation Procedures

System Functional Checks

Verifying door travel direction, limit switches, and mechanics.

Emergency Operation Safety

Critical safety precautions for emergency manual operation.

Manual Operation via Hand Chain

Manual Operation via Hand Crank

Maintenance and Servicing

Manual Door Movement (Disengage)

General Maintenance Safety