Link Controls CDO-150 - User Manual

CDO
Door Operator / CDO/ LC-3158 Rev.B
Stuart Road, Manor Park, Runcorn, Cheshire, WA7 1TS
T: +44 (0)1928 579050 F: +44 (0)1928 579259 www.linkcontrols.co.uk enquiries@linkcontrols.co.uk
Warning : Please read these instructions fully before installation
Link Controls
Instructions for Rolling Door Operator type :

Link Controls CDO-150 Specifications

General

Brand	Link Controls
Model	CDO-150
Category	Door Opening System
Language	English

Summary

General safety instructions

Target Group

Installation

Initial Operation

Motor Connections

Details wiring for 'Standard' 3ph and '400V / 690V' 3ph motors, including Star and Delta connections.

Inverter Drive Motor Connection

Shows 3 x 230V Delta connection for inverter drives, with warnings about correct configuration.

Safety Circuit Overview

Mechanical Limit Switches

Details control/limit cams and their connections to microswitches for setting door limits.

Setting Mechanical Limits

Guide to adjusting control cams for CLOSED and OPEN end positions using locking and fine screws.

System Checks

Procedures for checking door travel direction, limit switch settings, and overall mechanical functions.

Digital Limits and Encoder Wiring

Explains wiring allocation for AVE encoder plug and terminals for digital limit setting.

Emergency Operation

Emergency Wheel;Guide Operation

Emergency Hand Crank Operation

Emergency Floor Level Hand Chain (KE)

Maintenance

Maintenance Procedures and Checks