Plug-In ECU Installation Manual 25
© 2024 Link Engine Management Ltd
WARNING: Always download the latest Installation Manual from linkecu.com and check the latest status of
known issues before installing the ECU.
Please contact your nearest Link dealer when suspecting a compatibility issue.
1.11.1
WRXLink (11)
Some key start models may have the security/immobilizer lamp remaining on on the dash after fitting an
aftermarket ecu.
AC Request and CE lamp (CAN bus controlled) has been reported as not working on some 2013-2014
models. This should be a simple firmware update to fix but we haven’t yet been able to find a car with this
specific problem to test. Please contact tech support if you suffer this problem and are technically capable of
helping investigate.
To Previous Page
Loading...