44
Add a device manually
Getting started
Process
1. Please follow the instructions and make sure the passwords are
entered correctly.
2. One device can only be added with one App account, if the
device has already been added with another account, then it can’t
be added to any other account again. Devices can be shared with
other users in the Home Management settings.
3. If the device has been added to another account it will need to
be removed first. After the device has been removed it will reset
automatically and the status light will change from a solid blue to a
flashing red.
Step 1 Open the Link2Home Pro App, click "+" (in the upper
right hand corner of the screen) or "Add Device". Then select
"Add Manually".
Step 2 : Select "Security & Video Surveillance". Power the device
on and make sure the indicator is flashing quickly or a prompt
tone is heard. If you do not hear a prompt or see a flashing red
light press and hold the reset button for 5 seconds.
To Next Page
Loading...