EtherFast
®
Cable/DSL Routers
19
Instant Broadband
®
Series
2. Static or Fixed IP Address
If your ISP says that you are connecting through a static or fixed IP address
from your ISP, perform these steps:
a. Select Static IP as the WAN Connection Type.
b. Enter the WAN IP Address.
c. Enter the Subnet Mask.
d. Enter the Gateway Address.
e. Enter the DNS in the 1, 2, and/or 3 fields. You must enter at least one DNS
address.
f. Click the Apply button to save the settings.
18
D2
3. PPPoE
If your ISP says that you are connecting through PPPoE or if you normally
enter a user name and password to access the Internet, perform these steps:
a. Select PPPoE as the WAN Connection Type.
b. Enter the User Name.
c. Enter the Password.
d. Click the Apply button to save the settings.
e. Click the Status tab, and then click the Connect button to start the con-
nection.
D3
Screen for BEFSX41
Screen for BEFSX41
To Next Page
Loading...
