3. Connect your new router to your modem or modem-router.
Plug one end of the included
ethernet cable into the yellow
Internet port on your new
router. If you have a modem,
plug the other end into the
Ethernet (LAN) port on the
modem.
Plug one end of the included
ethernet cable to the yellow
Internet port on your new
router. If you have a modem-
router, plug the other end into
any available port.
4. Connect to the secure Wi-Fi name shown on the sticker. (You can change these
details later.) Select the option to automatically connect to this network in the future.
You will not have internet access until you complete router setup (see Step 5).
Place sticker here
Wi-Fi Name/Wi-Fi Password
5. Enter http://myrouter.local in a web browser. Follow the on-screen instructions to
complete setup. You also can enter 192.168.1.1 in a browser to start setup.
6. Once you are finished with setup, please be sure to register your router so we can
keep you informed about security updates, product recalls and other things that will
improve your experience.
To Next Page
Loading...
