7
Advanced Configuration
How to open the browser-based utility
To access some advanced settings, you need to open the browser-based utility. Make sure you are
connected to the router, open a web browser and enter 192.168.79.1.
If you are using a modem-router (gateway), you might need to enter 192.168.79.1.
Note—If none of those options take you to the setup wizard, go to
www.linksys.com/support/setupIP for more help.
The router will prompt you for a password.
If you changed the password during setup, enter the new password. Click LOGIN. If you didn’t change
the password, or skipped setup altogether, the default router password is admin.
To Next Page
Loading...
