Blinking 5G and 4G LED blinking
together means no SIM card
detected
WiFI Green WiFi enabled
Off WiFi disabled
Blink once New device connected
Blink twice Device disconnected
Bottom
1. Power port (12-24V DC IN)
2. RS232 serial port
3. RS485 serial port
4. USB port (for troubleshooting/debugging)
5. 2.5 Gigabit Ethernet port
6. Reset button - Press and hold the reset button for 5 seconds to reset the router to factory
default setting
7. SIM card slot - To remove the SIM card, press the card in until it clicks. It will pop out
automatically. Do not remove the SIM card when the router is operating
To Next Page
Loading...
