EasyManua.ls Logo

Linksys HomeLink Series User Manual

Linksys HomeLink Series
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HomeLink
Phoneline
Network Card
Use this guide to install these
Linksys products:
HPN100
HomeLink Phoneline Network Card
HPN100SK
HomeLink Phoneline Network in a Box
HomeLink Series
User Guide
Question and Answer IconNeed help?

Do you have a question about the Linksys HomeLink Series and is the answer not in the manual?

Linksys HomeLink Series Specifications

General IconGeneral
BrandLinksys
ModelHomeLink Series
CategoryComputer Hardware
LanguageEnglish

Summary

Introduction

How Does It Work?

Explains Frequency Division Multiplexing (FDM) and network data transfer rates.

Features

Package Contents

About Sharing

Sharing Your Internet Connection

Details setting up a proxy server with WinGate Home for sharing Internet access.

About Plug-and-Play PCI Technology

Jumper Changes

Describes changing IRQ/I/O values using motherboard jumpers.

Menu Changes

Explains modifying IRQ/I/O values via the PC's BIOS setup menu.

Plug-and-Play BIOS List

Lists common BIOS versions compatible with Plug-and-Play functionality.

Hardware Setup

Before You Begin

Details the card's RJ-11 and RJ-45 ports and their respective usage.

If You Want to Use Ethernet...

Covers requirements for connecting to a 10Mbps Ethernet network.

Installing the HomeLink Card

Step-by-step guide for physically installing the card into a PCI slot.

Installing the Cabling

Instructions for connecting the network using telephone or Ethernet cables.

Software

Preparing to Install the Software

Outlines prerequisites and steps before installing the network driver.

Windows 98 Setup

To install the network driver:

Step-by-step guide for installing the network driver in Windows 98.

Windows 95 Setup

To install the network driver:

Step-by-step guide for installing the network driver in Windows 95.

Windows NT 4.0 Setup

To install the network driver:

Step-by-step guide for installing the network driver in Windows NT 4.0.

Using WinGate Home

Changing the Card Settings

Ethernet Configuration

Options for duplex and speed performance of the RJ-45 Ethernet port.

Mode Selection

Options to configure the card for 10/100 Ethernet, 10BaseT Ethernet, or Phoneline.

Phoneline Configuration

Settings for Phoneline port modes like Auto Config, Low Power/High Speed.

Appendix

Twisted-Pair Cabling

Describes twisted-pair cabling grades and wire color codes.

Troubleshooting

Common problems and solutions for hardware and software setup.

Removing the Installed Components in Windows 95 and 98

Instructions for uninstalling network card and software from Windows.

Specifications

Customer Support

Related product manuals