Troubleshooting
Troubleshooting Hints for Windows
Problem 1: Windows doesn't detect new hardware
with the HomeLink Card hardware installed, or it
continues to detect the card each time I restart the
PC.
Solutions
You might not have inserted the PCI card correctly
or securely into the appropriate slot of your com-
puter. Check that the card is securely inserted into
the appropriate slot.
The motherboard in your system might not be
Plug-and-Play compatible, your PC's Plug-and-
Play settings may not be enabled, or the mother-
board may have Plug-and-Play options not sup-
ported by Windows. If you are not sure, contact
your PC's manufacturer.
Problem 2: Windows can't locate the driver for
the HomeLink Card device.
Solutions
You may have inserted the wrong CD-ROM into
your PC's drive.
The CD-ROM may be defective or files may be
missing, or you may be pointing Windows to the
wrong directory or drive.
Appendix
49
To Next Page
Loading...