Windows NT
To install the network driver:
1. From the Windows NT desktop, click on Start,
Settings, Control Panel. Double-click on the
Network icon. If you already have NT
Networking installed, click on Adapter, then click
on Add and skip to step 3. Otherwise, a message
will appear that says, “Windows NT networking is
not installed. Install now?” Click Ye s .
2. The Network Setup Wizard will appear. In the
choices box, check Wired to the Network and click
on Next.
3. Windows NT will now ask you to pick a net-
work adapter. Click Select From List.
35
To Next Page
Loading...