6. If you are using Windows 98, you are ready to
start over and try re-installing the card. If you are
using Windows 95, continue on with the next step.
If You are Using Windows 95 Only
7. When your PC reboots, you will see a window
asking you if you want to install your HomeLink
Card. Press Cancel. Next, double-click on My
Computer and double-click on your C drive.
8. Double-click on Windows, then on the
ws2bakup sub-directory. Double-click on the file
ws2bakup.bat and let it run. When it is finished,
restart your PC. Now go to the Windows 95 or 98
installation instructions and re-install the card.
Appendix
56
To Next Page
Loading...