16
Configuration
Linksys
Video Clip
This function is used to determine when video clips will be recorded and stored
after an event is triggered.
Pre-Alarm Buffer - Images can be stored internally on the server from the time
immediately preceding the trigger. Enter the desired length of time.
Post-Alarm Buffer - Images can be stored internally on the server from the
time immediately following the trigger. Enter the desired length of time.
Maximum buffer size - Specify the maximum file size allowed.
Storage Management
Storage Management is used to view all the recorded files on the Micro-SD/
SDHC card.
Item - Type of memory card.
Total Capacity - Storage capacity of memory card.
Used Space - Used space on memory card.
Available Space - Free space on memory card.
Memory Card Management -Click Reload to reload the memory card.
Automatic Recycle - When remaining available space is less than 100MB older
files will be overwritten so recording can continue.
Offline Record - Enable if you would like the camera to continue recording to
the memory card if the camera temporarily disconnects from a network video
recorder.
To Next Page
Loading...