18
Configuration
Linksys
The following message will show during the firmware upgrading process.
Back Up and Restore
Export/import the configuration files of the network camera.
NOTE:
This features is required Windows Internet Explore to work properly.
Export - Click Export to pop up a dialog to indicate the location and file to
export.
Import - Click Import to import the configuration file back into the network
camera.
Reset to Default
Restore the camera to default factory settings.
Click the check box if you don’t want Data and Time settings or IP settings to be
restored to default.
Reboot
The camera will take about one minute to reboot.
To Next Page
Loading...