Need help?Do you have a question about the Linksys PLE300 and is the answer not in the manual?
General| Product Type | Powerline Ethernet Adapter |
|---|---|
| Data Transfer Rate | Up to 200 Mbps |
| Interface | Ethernet |
| Powerline Standard | HomePlug AV |
| Number of Ports | 1 |
| Encryption | 128-bit AES |
| Standards | IEEE 802.3, IEEE 802.3u |
| Security | 128-bit AES Encryption |
| LED Indicators | Power, Ethernet, Powerline |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating Humidity | 10% to 85% Non-condensing |
| Storage Humidity | 5% to 90% Non-condensing |
| Certifications | FCC, CE |
| Ports | 1 x 10/100 Ethernet |
Connects one end of the Ethernet network cable to the adapter's Ethernet port.
Connects the other end of the Ethernet cable to your computer or network device.
Connects the power cord to the adapter and plugs it into an electrical outlet.
Confirms that the Power, Ethernet, and Powerline LEDs light up correctly.
Refer to the User Guide on CD-ROM for instructions on configuring advanced security.
Provides contact information for technical support, website, and sales information.
To Next Page
