Need help?Do you have a question about the Linksys 10/100 LAN Card 10/100 and is the answer not in the manual?
General| Data Link Protocol | Ethernet, Fast Ethernet |
|---|---|
| Data Transfer Rate | 100 Mbps |
| Interface Type | PCI |
| Connector Type | RJ-45 |
| Compatibility | PC |
Provides an overview of the EtherFast 10/100 LAN Card's features and performance.
Explains the meaning of the Link/Act and 100 Mbps status lights.
Describes the RJ-45 port for network cable connection.
Step-by-step instructions for physically installing the card and connecting network cables.
Steps to install the network driver using the Add New Hardware Wizard.
Steps to configure network components, protocols, and sharing in Windows 98.
Steps to configure network components, protocols, and sharing in Windows 95.
Steps to install the driver using the Found New Hardware Wizard in Windows 2000.
Procedure for installing the driver via Network Configuration and Setup Wizard.
Steps to prepare the PC before installing Novell Client32 software.
Procedure for installing the Novell Client driver onto the PC.
Steps for configuring the EtherFast card for Novell NetWare 3.12 server.
Steps for configuring the EtherFast card for Novell NetWare 4.x server.
Steps for configuring the EtherFast card for Novell NetWare 5.x server.
Solutions for common problems specific to Windows 95 and Windows 98.
How to enable file and printer sharing on your PC for network access.
Steps to reset networking configuration for a clean start in Windows 95/98.
Information on motherboard compatibility and BIOS settings for WOL.
Procedure to test WOL functionality via network link state changes.
Diagram showing wire color assignments for RJ-45 connectors.
Wiring specifications for straight-through Ethernet cables.
Wiring specifications for crossover Ethernet cables.
Operating and storage conditions for the LAN card.
To Next Page
