Linksys 10/100 LAN Card 10/100 - Installing Driver for Windows 95 Version B

EtherFast
®
10/100 LAN Cards
17
Installing the Driver in Windows 95 Version B
1. While the Update Device Driver Wizard window is visible (previous page),
put the EtherFast Card 10/100 LAN Card Driver Disk into your floppy
drive and click Next.
2. Windows 95 will find the Linksys LNE100TX Fast Ethernet Adapter
(LNE100TX v4) driver on the disk. If Windows fails to find the driver, see
problem 2 on page 45. Click Finish.
3. Windows will begin copying the EtherFast Card’s driver files to your PC.
Refer to the chart on the next page to help guide you through the process.
LNE100TX v4 test doc.qxd 3/22/00 4:12 PM Page 17