Linksys PSUS4

A Division of Cisco Systems, Inc.
®
Model No.
WIRED
with 4-Port Switch
PrintServer for USB
PSUS4
User Guide

Linksys PSUS4 Specifications

General

Brand	Linksys
Model	PSUS4
Category	Print Server
Language	English

Summary

Chapter 2: Getting to Know the USB PrintServer

The Back Panel

Describes the ports and buttons located on the rear of the USB PrintServer, including LAN ports and the USB port.

The Front Panel

Chapter 3: Connecting the PrintServer

Connecting the USB PrintServer to your Network

Step-by-step instructions for physically connecting the PrintServer to the network and printer using cables.

Chapter 4: Installing the PrintServer using the Setup Wizard

Chapter 5: Windows Driver Installation

Installation

Provides step-by-step instructions for installing the PrintServer driver on Windows, including driver and port configuration.

Chapter 6: Configuring the PrintServer

The Setup Tab

The Protocol Tab - TCPIP

Explains how to configure TCP/IP settings like IP address, subnet mask, and gateway for network communication.

Chapter 7: Internet Printing Protocol

Windows IPP Client Setup

Chapter 8: Bi-Admin Management

Overview

Introduces the Bi-Admin utility for managing the PrintServer's internal settings, status, and diagnostics.

Bi-Admin Installation

Provides step-by-step instructions for installing the Bi-Admin management utility software on a computer.

Starting the Bi-Admin Management Utility

The Bi-Admin Management Utility

Device Status

Printer Status

Configuration

Covers the main configuration settings within Bi-Admin, including System, TCP/IP, AppleTalk, NetBEUI, Internet Printing, and Port tabs.

Appendix A: Troubleshooting

Common Problems and Solutions

Provides solutions for common issues encountered during PrintServer installation and operation, such as LED status and connectivity problems.

Appendix C: Upgrading Firmware

Appendix F: Specifications