Linksys RTP300 - Placement Options; Figure 4-9: Attaching the Stand (Optional)

Broadband Router with 2 Phone Ports
13
Chapter 4: Connecting the Router
Placement Options
Placement Options
There are three ways to place the Router. The first way is to place it horizontally on a surface, so it
sits on its four rubber feet. The second way is to stand the Router vertically on a surface
(this uses an
optional stand)
. The third way is to mount it on a wall. The second and third options are explained in
further detail below.
Stand Option
If you have the optional stand, then you can place the Router vertically on a surface.
1. Line up the center of the Router’s stand with the center of the Router’s labeled edge.
2. Insert the Router into the stand.
Proceed to “Chapter 5: Configuring the Router.”
Figure 4-9: Attaching the Stand
(Optional)