Linksys RTP300 - Page 7

Broadband Router with 2 Phone Ports
List of Figures
Figure 3-1: Back Panel 7
Figure 3-2: Front Panel 8
Figure 4-1: Connect the Modem 9
Figure 4-2: Connect a PC 9
Figure 4-3: Connect the Power 10
Figure 4-4: Connect a Telephone 10
Figure 4-5: Router Connected to Another Router 11
Figure 4-6: Connect the Existing Router 12
Figure 4-7: Connect the Power 12
Figure 4-8: Connect a Telephone 12
Figure 4-9: Attaching the Stand (Optional) 13
Figure 4-10: Measurement between Wall-Mount Slots 14
Figure 5-1: Router’s IP Address 18
Figure 5-2: Router Login 18
Figure 5-3: Setup Tab - Basic Setup (Obtain an
IP automatically) 19
Figure 5-4: Static IP 20
Figure 5-5: PPPoE 21
Figure 5-6: Setup Tab - DDNS (DynDNS.org) 24
Figure 5-7: Setup Tab - DDNS (TZO.com) 24
Figure 5-8: Setup Tab - MAC Address Clone 25
Figure 5-9: Setup Tab - Advanced Routing 26
Figure 5-10: Routing Table Entry List 27
Figure 5-11: Security Tab - Firewall 28
Figure 5-12: Security Tab - VPN Passthrough 29
Figure 5-13: Access Restrictions Tab - Filter 30
Figure 5-14: Filtered MAC Address 30
Figure 5-15: Access Restrictions Tab - Device Access Control 32
Figure 5-16: Applications & Gaming Tab - Port
Range Forwarding 33
Figure 5-17: Applications & Gaming Tab - Port Triggering 34
Figure 5-18: Applications & Gaming Tab - DMZ 36
Figure 5-19: Applications & Gaming Tab - QoS 37
Figure 5-20: QoS - Create Rule 38
Figure 5-21: Administration Tab - Management 39
Figure 5-22: Administration Tab - Log 40
Figure 5-23: Administration Tab - Factory Defaults 41
Figure 5-24: Administration Tab -Diagnostics 42
Figure 5-25: Ping Test 42
Figure 5-26: Traceroute Test 42
Figure 5-27: Status Tab - Router 43
Figure 5-28: Status Tab - Local Network 45
Figure 5-29: DHCP Active IP Table 45
Figure 5-30: Status Tab - Voice 46
Figure 5-31: Voice Tab 47
Figure B-1: IP Configuration Screen 69
Figure B-2: MAC/Adapter Address 69
Figure B-3: MAC/Physical Address 70
Figure B-4: MAC Address Clone 70
Figure B-5: MAC Address Filter 70