Linksys SPA8000

PRODUCT DATA
Model No. SPA8000
Physical Interfaces
8 port standard FXS voice ports (RJ-11)
RJ-21 (50-pin telco connector) multi-port voice connection
1 WAN 100baseT RJ-45 Ethernet Port (IEEE 802.3)
Reset button
Subscriber Line Interface Circuit (SLIC)
Ring Voltage: 40-90 Vpk Configurable
Ring Frequency: 20 Hz - 25 Hz
Ring Waveform: Trapezoidal
Maximum Ringer Load: 5 REN
On-hook/off-hook Characteristics:
On-hook voltage (tip/ring): -46 ~ -56V
Off-hook current: 18-25 mA
Terminating Impedance: 600 ohm resistive or 270 ohm + 750ohm//
150nF complex impedance
Frequency Response 300 – 3400Hz
Return Loss (600 ohm, 300-3400Hz) Up to 20dB
Insertion Loss (1 Vrms @1 kHz) 3dB – 4dB
THD (350 mV peak @ 300 Hz) Up to 3%
Idle Channel Noise -72 dB (typ.)
Longitudinal Balance 55 dB (typ.)
Off Hook Threshold (Line Seizure) Rdc < 1000 ohm
On Hook Threshold (Line Release) Rdc >10000 ohm
Rdc DC Supervisory Range Rdc > 450 ohm
Regulatory Compliance
FCC (Part 15 Class B), CE, ICES-003, C-Tick Certification, RoHS, UL
Power Supply
Switching Type (100-240v) Automatic
DC Input Voltage: 12V DC at 3.0 A Max.
Power Adapter: 100-240v - 50-60Hz AC Input
Indicator Lights/LED
Power, Ethernet, Voice Status, Phone 1,2,3,4,5,6,7,8
Documentation
Quick Installation, User, and Configuration Guides are downloaded from www.Linksys.com
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only
Dimensions 6.69 x 1.54 x 8.66” (170 x 39 x 220 mm) W x H x D
Weight 2.85 lbs (1.30 kg)
Operating Temp. 32 to 113°F (0°C to 45°C)
Storage Temp. -13 to 185°F (-20°C to 85°C)
Operating Humidity 10% to 90% Non-Condensing, operating and non-operating
Storage Humidity 10% to 90% Non-Condensing, operating and non-operating
Specifications
Environmental