• Buttons and switch
• Reset button
NOTE: To reset the node to its factory defaults, press and hold the button first (you will see a
bright red flash, followed by three to four quick red faded pulses then another bright red
flash), then you can release the button.
• Wi-Fi Protected Setup™ (WPS) button
• One power switch (sliding)
• Weight: 0.95 kg (2.15 lbs)
• Dimensions: 3.1 in x 3.1 in x 7.3 in
Setup requirements
• A modem or gateway with an active internet connection
• Latest version of the Linksys app
• Latest iOS or Android™ mobile device
• Bluetooth® (preferred for setup)
Upgrading the firmware of your Velop system
It is recommended that you enable automatic firmware upgrades. Updating your Velop
system’s firmware keeps your WiFi features current and fixes many performance issues. For
further assistance, you can also call Linksys technical support.
For instructions on how to manually upgrade the firmware of your Velop system, click
here. Choose your product below to download the latest firmware.
MX8500 Downloads
Velop WiFi 6 (MX4200, MX4200C, MX8000, MX8400C, MX12600) Downloads
Velop AX (MX5300, MX10600) Downloads
Velop Dual-Band (WHW01, VLP01) Downloads
Velop (WHW0301, WHW0302, WHW0303) Downloads
This article will show you how to automatically upgrade the firmware of your Velop
system. Click the links below for specific instructions.
To Next Page
Loading...
Need help?
General
