55
Network PC Card and PCI Adapter
2. The IRQ Base level can be
changed in order to avoid
possible conflicts with other
system devices.
3. The Mode setting should be
either Infrastructure or Ad-
Hoc, depending upon your
network’s settings. The
Infrastructure mode allows a
wireless adapter to communi-
cate with a wired network
employing an Access Point,
while the Ad-Hoc mode
allows wireless-to-wireless,
peer-to-peer communication.
The Resources and Properties
screen allows you to make
modifications to your
Network PC Card, optimizing
performance. Check with
your other wireless PCs
before making any changes
and then follow these steps
when configuring the
Resource and Properties
Fields:
1. The I/O Base setting should
be unique and not conflict
with any other device settings
in your system.
Instant Wireless
TM
Series
56
Configuring the Network PC Card for Windows NT
NOTE: In order to
check for potential
IRQ conflicts, run
WINMSD by selecting
RUN from the Start
menu and typing win-
msd.exe and pressing
the Enter key.
To Next Page
Loading...
