Linksys WDT11 - Installing the PCI Drivers for Windows 2000

3. Select Specify a
location, and click
the Next button.
Insert the Setup
Utility CD into
your CD-ROM
drive.
On the following screen,
type in d:\WPC11-
WDT11\win2000
(where “D” is the letter
of your CD-ROM drive)
in the Copy manufac-
turer’s files from field
and click the OK button.
4. Windows will now search for the driver. After Windows acknowledges find-
ing the driver, click the Next button.
26
1. Windows 2000 will automatically identify the Network PC Adapter, once it
is connected to the PC, and prompt you to install the necessary driver. Make
sure that the Setup Utility CD (included) is inserted into your CD-ROM
drive and click the Next button on the Found New Hardware Wizard screen
to proceed.
2. Select Search for a suitable driver... and click the Next button. This will
search for the Windows 2000 driver.
25
Network PC Card and PCI AdapterInstant Wireless
TM
Series
Installing the PCI Drivers for Windows 2000