6. You will now reach the
screen shown here. This is
called the Properties
screen. Please check with
your other wireless comput-
ers for the proper settings.
For more information con-
cerning these settings, refer
to the section called
Configuring the Network
PC Card for Windows NT.
Adjust the settings as are
appropriate and click the
OK button.
7. The PCI Adapter has now
been installed. You will see it
added onto this screen. Click
the Close button to continue
and then restart your comput-
er. Once your computer has
restarted, you can continue on
to the Configuration Utility
section.
24
3.A list of adapters
will appear on
the next screen.
You will not
want to select
one of these,
however, as your
installation disk
(Setup Utility
CD) has all of
the appropriate
drivers. Click the
Have Disk but-
ton to continue.
4. On the Insert Disk
screen, type
“ D:\WPC11-
WDT11\WINNT”
in the field provided
(where “D” is the let-
ter of your CD-ROM
drive). Make sure the
Setup Utility CD is
inserted in the CD-
ROM drive. Then,
click the OK button
to continue.
5. The Select OEM Option
screen will show two options
from which to choose. You
will want to highlight
Instant Wireless - Network
PCI Card and click the OK
button to continue.
23
Network PC Card and PCI Adapter
NOTE: After you have installed the PCI Adapter, reapply the
Windows NT service pack.
Instant Wireless
TM
Series
To Next Page
Loading...
