If You Have Installed Network Hardware Before:
1. Windows NT is not a
Plug-and-Play Operating
System and will not
automatically identify
the PCI Adapter. To
begin setup, insert
Setup Utility CD into
your CD-ROM drive
and click Start then
Settings to bring up the
Control Panel. Then,
double-click on the
Network icon.
2. To add the Network PC
Card, you will click the
Adapters tab and then click
the Add button to continue.
22
17. Verify that the correct information is presented on this screen, which will
appear next. To make any corrections, click the Back button. To continue,
click the Next button.
8. Windows NT has now completed installing the network. Click the Finish
button to continue and then restart your computer. Once your computer has
restarted, you can continue on to the Configuration Utility section.
21
Network PC Card and PCI AdapterInstant Wireless
TM
Series
NOTE: After you have installed the PCI Adapter, reapply the
Windows NT service pack.
To Next Page
Loading...
