12
Chapter 3: Setting up and Connecting the USB Network Adapter
Setting Up the Adapter
Wireless-G PCI Adapter
WPA-Personal Needed for Connection
Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down
menu.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
The longer and more complex your Passphrase is, the more secure your network will be.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
PSK2 Needed for Connection
Enter a Passphrase of 8-63 characters in the Passphrase field.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
Figure 3-13: WPA-Personal Needed for Connection
Figure 3-14: PSK2 Needed for Connection
To Next Page
Loading...
